|
 |  |  |  | .: 14079 Sat Multischalter EMP 9/12 mit Terrest. :.
| Multischalter 9/12 EMP Centauri Multischalter 9/12 für 2 Satelliten
Standard Multischalter 9/12 -
EMP Centauri mit integriertem Netzteil für 12 Teilnehmer und
2 Satelliten,Eingang für 8 Sat-Ebenen,
1 terrestrischer Eingang (passiv),
optimaler Betrieb mit Quattro LNB
DiSEqC 2.0 distribution system for indoor use that can work with two Quatro LNBs, or even with four Dual or Twin LNBs. This multiswitch allows connection of 8 different LNBs signals (polarities). Input level can be set by attenuators in range of 15 dB. Using a built-in switch, it is also possible to send the command “22kHz” and DiSEqC 1.0 Write N0 command “High Band” to selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the inputs. Integrated power supply is protected by a fuse and short-circuit protection with acoustic alarm. The LED on the power supply indicates the power supply activity. In case of a short-circuit on a SAT input, the LED goes off and the acoustic alarm is activated. After power supply disconnection from the network and removal of the short-circuit cause, the multi-switch power supply can be reconnected after a minute.
Specifications of S. 150-CP-12
Frequency Range LNB-Inputs 950-300 MHz
Terr. Input 40-862 MHz
Outputs 40-2300 MHz
Control DiSEqC commands or (10-14.5 / 15.5-20 V + 0/22 kHz
+ Tone Burst)
Insertion Loss 950-2150 MHz 5 dB avg.
40-862 MHz 2 dB avg.
SAT Inputs Isolation 20 dB min.
Maximum Input Level* SAT 95 dBµV
Terr. 110 dBµV
Power consumption (incl. connected LNBs) 45 VA max.
LNB power supply 1600 mA max.
Dimensions (w,d,h [cm]) 43.6 x 15.2 x 8.0
Temperature range –25 °C - +60 °C | 1 pcs. available, more within 48h | | |
|
|  |  | |  |
| Accessories for Sat Multischalter EMP 9/12 mit Terrest. | | | |
|
|
|
